Injin Tsatsar Kaya na Fiber Laser don Cire Fenti Mai Mai Cire Fenti
Bayanin Samfurin
Injin tsaftacewa na Laser sabuwar injin tsaftacewa ce mai kyau ga muhalli, mai sauƙin aiki, aiki mai ɗorewa, ta hanyar aikin laser mai ƙarfi na saman substrate don tsaftacewa, duk tsarin tsaftacewa ba zai lalata substrate ba, kuma tare da injin tsaftacewa na laser zuwa ga mai aiki gaba ɗaya amintacce ne kuma abin dogaro, sabon ci gaba ne a cikin injin tsaftacewa na gargajiya.
Fa'idodin injin tsabtace laser na yanzu: aiki ba tare da abubuwan amfani ba, matuƙar akwai injin tsaftacewa na lantarki za a iya amfani da shi don cire saman abin (kamar tsatsa, mai, fenti, rufin saman, shafi, da sauransu).
Amfanin Samfuri
Tsarin kula da akwati mai inci 27:
Laser mai gina jiki, kan laser da kayan haɗi
Yi amfani da kai tsaye akan wutar lantarki:
Tsarin wutar lantarki na duniya 220V, toshewa da kunnawa.
Aiki ɗaya-taɓawa Sauƙin aiki:
Ci gaba mai amfani da tsarin aiki mai amfani biyu.
Muhalli mai kyau:
Hanyar tsaftace masana'antu mafi dacewa ga muhalli
Shahararrun samfuran alama na duniya
Sabis na ƙimar farko:
Sabis na awanni 24
Na'urorin hannu guda biyu: Laser
Lokacin sauyawa na riƙewa da hannu da na robot <5 seconds.
Tallafin fasaha mafi girma a duniya:
Cikakken tsari da aka ɗauka Taimakon fasaha daga likita da babban ƙungiyar.
An inganta fasaha
Na'urar hannu ta laser mai amfani biyu ta ƙarni na huɗu da kuma na'urar laser ta 2D ta atomatik.
Mai sauƙin riƙewa da haɗawa tare da sarrafa kansa.
Mai sauƙin aiki kuma yana da ayyuka daban-daban.
SOFTWARE MAI KYAU NA GIDAN SAURA MAI BAN MAMAKI
1. Manhaja mai sauƙi, zaɓi sigogin da aka riga aka adana kai tsaye
2. Ajiye duk wani nau'in zane-zane na sigogi, ana iya zaɓar nau'ikan zane-zane guda shida: layi madaidaiciya/karkace/da'ira/kusurwar murabba'i/cika da'ira
3. Sauƙin amfani da aiki
4. Simple interface
Ana iya sauya yanayin bambanci na 5.12 da kuma zaɓarsa cikin sauri don sauƙaƙe samarwa da gyara kurakurai
6. Harshen zai iya zama Turanci/Sinanci ko wasu harsuna (idan ana buƙata)
SIFFOFIN MASU TSARO
| Matsakaicin matsakaicin ƙarfi (W) | 100 | 200 |
| Matsakaicin tsayin fitarwa (nm) | 1064±5 | 1064±5 |
| Ingancin katako (M2) | ≤ 1.6 | ≤ 1.8 |
| Tsarin daidaita wutar lantarki (%) | 10-100 | 10-100 |
| Rashin daidaiton wutar lantarki (%) | ≤ 5 | ≤ 5 |
| Yawan maimaita bugun jini (KHZ) | 20-400 | 20-2000 |
| Tsawon bugun jini (ns) | 10/20/30/60/100/200/250/350 Zaɓi | 10/30/60/240 Zabi |
| Matsakaicin ƙarfin bugun jini (mJ) | 1 | 1 |
| Tsawon zare (m) | 3 | 3/5 |
| Rarraba amincin Laser | 4 | 4 |
| Hanyar sanyaya | Sanyaya ta iska | Sanyaya ta iska |
